Publication:
Design of a parallel coupled microstrip line bandpass filter on the RO4003C� substrate

Simple item page
dc.citedby2
dc.contributor.authorHock G.C.en_US
dc.contributor.authorChakrabarty C.K.en_US
dc.contributor.authorid16021614500en_US
dc.contributor.authorid6701755282en_US
dc.date.accessioned2023-12-28T08:57:37Z
dc.date.available2023-12-28T08:57:37Z
dc.date.issued2006
dc.description.abstractThis paper describes the improvement of the artwork for a microwave circuit in order to have the dimensions of the desired physical realization. In highlighting the general modification, a fifth order parallel edge-coupled bandpass filter is designed and analyzed. The filter design, in most cases, is complicated by the presence of the physical constraint as the resulting artwork is not easily fabricated. Hence, the filter is designed to have matching stubs in order to ease the circuit fabrication. In designing the circuit, electronics design automation tool with filter synthesis wizard and optimizing features is used. The circuit is implemented on microstrip line technology and RO4003C � substrate is used. �2006 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo4133598
dc.identifier.doi10.1109/RFM.2006.331083
dc.identifier.epage271
dc.identifier.scopus2-s2.0-46249109883
dc.identifier.spage267
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-46249109883&doi=10.1109%2fRFM.2006.331083&partnerID=40&md5=4123616d0e929b55703c411635b0110a
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29772
dc.pagecount4
dc.sourceScopus
dc.sourcetitle2006 International RF and Microwave Conference, (RFM) Proceedings
dc.subjectBandpass filter
dc.subjectDielectric constant
dc.subjectParallel coupled resonator and fifth order
dc.subjectBandpass amplifiers
dc.subjectComputer aided design
dc.subjectMicrostrip lines
dc.subjectMicrowave circuits
dc.subjectMicrowave devices
dc.subjectMicrowaves
dc.subjectOptical design
dc.subject(2+1) dimensions
dc.subject(OTDR) technology
dc.subjectBand pass
dc.subjectCircuit fabrication
dc.subjectElectronics design automation (EDA)
dc.subjectFilter designs
dc.subjectFilter-synthesis
dc.subjectGeneral (CO)
dc.subjectIn order
dc.subjectInternational (CO)
dc.subjectMicrostrip (MSL)
dc.subjectParallel-coupled microstrip lines
dc.subjectphysical realization
dc.subjectWave filters
dc.titleDesign of a parallel coupled microstrip line bandpass filter on the RO4003C� substrateen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS