Publication:
Design An Auto-Reclose At Transmission Line Based In MATLAB Simulink

Simple item page
dc.contributor.authorMuhammad Abrar Bin Abdul Hamiden_US
dc.date.accessioned2023-05-03T15:17:21Z
dc.date.available2023-05-03T15:17:21Z
dc.date.issued2019-10
dc.description.abstractThis research work is mainly focusing on how to deal when short circuit faults happen in power transmission lines. Two types of electrical faults known in power system are temporary and permanent fault. For this project, both faults are used for the case of design and install auto-reclose to the transmission line by de-energize the faulted phase temporarily, before re-energizing after short delay allowance by reclosing back the circuit breakers. The challenge is that whether the system fully extinguish the arc after breaker reclosing. Regarding transient fault cases, there is no guarantee that the arc will be completely extinguished by the moment of reclosing which leads in re-striking of the arc and can be considered as an unsuccessful reclosing. The project must be done in a way to collect as many simulation data as possible on the behavior of the synchronous machine when fault or disturbance occurred at the case when the machine lose the line containing the load. Three-phase circuit breaker installed on the three-phase transmission line must be provided with switching which simulate the scenario of implementing an auto-reclose fault clearance on the transmission line using Matlab Simulink software.en_US
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/20738
dc.language.isoenen_US
dc.subjectDesign Of An Auto-Reclose At Transmission Line Based In MATLAB Simulinken_US
dc.titleDesign An Auto-Reclose At Transmission Line Based In MATLAB Simulinken_US
dc.typeResource Types::text::Thesisen_US
dspace.entity.typePublication
Files
Collections
COE Thesis and Final Year Project (FYP)